LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2009 >> H3 Alpha >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Front Drive Axle) >> Repair Instructions >> Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Differential Carrier Shield & Bolts
    GM339429Courtesy of GENERAL MOTORS CORP.
  1. Install the front differential carrier shield.
    2. NOTE: Refer to Fastener Notice .
  2. Install the front differential carrier shield bolts.

    Tighten:  Tighten the front differential carrier shield bolts to 20 N.m (15 lb ft).

  3. Lower the vehicle.
scientia non olet · About LEMON Manuals