LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2009 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 6.2L - Introduction >> Repair Instructions >> Fuel Hose/Pipes Assembly Replacement >> Removal Procedure

Removal Procedure

  1. Clean all the fuel pipe and hose connections and the surrounding areas before disconnecting in order to avoid possible contamination of the fuel system.
  2. Remove the fuel tank. Refer to Fuel Tank Replacement .
    3. Fig 1: View Of Fuel Sender & Fuel Pressure Sensor Electrical Connectors
    GM863091Courtesy of GENERAL MOTORS CORP.
  3. Remove the rear fuel feed pipe and the evaporative emission pipe from the fuel sender and the fuel tank clips.
  4. Cap the fuel pipes in order to prevent possible fuel system contamination.
scientia non olet · About LEMON Manuals