LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2009 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Replacement >> Removal Procedure

Removal Procedure

    WARNING: Refer to Battery Disconnect Warning .
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
    2. Fig 1: View Of Negative Battery Cable
    GM662101Courtesy of GENERAL MOTORS CORP.
  2. Raise and suitably support the vehicle with safety stands. Refer to Lifting and Jacking the Vehicle .
  3. Remove the engine protection shield. Refer to Engine Protection Shield Replacement .
  4. Remove the forward lamp wiring harness ground/negative cable bolt.
  5. Remove the engine wiring harness ground/negative cable bolt.
  6. Remove the negative battery cable.
scientia non olet · About LEMON Manuals