LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2009 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Body & Frame >> Fixed And MOVEABLE Windows >> Diagnostic Information and Procedures >> Midgate Power Window Inoperative >> Component Testing

Component Testing

Midgate Window Switch

  1. Ignition OFF, disconnect the harness connector at the midgate window switch.
  2. Test for infinite resistance between the signal terminals B and C and the ignition terminal A with the switch in the INACTIVE position.
    • If less than the specified value, replace the midgate window switch.
  3. Test for less than 2 ohms between the signal terminal C and the ignition terminal A with the switch in the UP position.
    • If greater than the specified range, replace the midgate window switch.
  4. Test for less than 2 ohms between the signal terminal B and the ignition terminal A with the switch in the DOWN position.
    • If greater than the specified range, replace the midgate window switch.
scientia non olet · About LEMON Manuals