LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 475 (Rear Suspension System) >> Repair Instructions >> Stabilizer Shaft Insulator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Stabilizer Shaft Bracket Mounting Bolts
    GM858484Courtesy of GENERAL MOTORS CORP.
  1. Install the stabilizer shaft insulator to the stabilizer shaft with the slit facing forwards.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the stabilizer shaft bracket.
  3. Install the stabilizer shaft bracket mounting bolts and tighten to 60 N.m (44 lb ft).
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals