LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 412 (Suspension Control System - Suspension Damping) >> Repair Instructions >> Electronic Suspension Control Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Electronic Suspension Control Module
    GM1530519Courtesy of GENERAL MOTORS CORP.
  1. Install the ESC module (2).
  2. Connect the ESC module electrical connector (1).
  3. CAUTION: Refer to Fastener Caution .
  4. Tighten the ESC module nuts to 9 N.m (80 lb in).
  5. Install the right rear trim panel.
  6. Refer to Control Module References for programming and setup information.