LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 368 (Wiper System And Washer System) >> Repair Instructions >> Windshield Wiper Motor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Wiper Motor-To-Wiper Motor Module Retaining Screws
    GM781428Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the wiper motor onto the wiper motor module assembly with the screws (1) and tighten to 10 N.m (89 lb in).
  2. Fig 2: View Of Special Tool J39529 And Wiper Motor Crank Arm
    GM306515Courtesy of GENERAL MOTORS CORP.
  3. Install the drive links onto the wiper motor crank arm using the J 39529  . See Special Tools .
  4. Fig 3: View Of Windshield Wiper Motor Components
    GM776830Courtesy of GENERAL MOTORS CORP.
  5. Install the windshield wiper transmission (1). Refer to Windshield Wiper Transmission Replacement .
  6. Operate the wipers and check for proper operation.