LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 346 (Rear Suspension System) >> Repair Instructions >> Wheel Stud Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Stud Into Axle Flange
    GM690039Courtesy of GENERAL MOTORS CORP.
  1. Position the wheel stud in the axle flange.
  2. Install the 4 washers and the lug nut to the stud.
  3. Tighten the lug nut until the stud fully seats.
  4. Remove the lug nut and the washers.
    5. Fig 2: View Of Rear Brake Drum
    GM1254558Courtesy of GENERAL MOTORS CORP.
  5. Install the rear brake drum. Refer to Brake Drum Replacement .
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals