Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Spring Hanger Bracket Bolts

Courtesy of GENERAL MOTORS CORP.

Install the shackle assembly to the spring.

CAUTION: Refer to Fastener Caution .

Install the shackle nut and bolt to the spring and tighten to 85 N.m (63 lb ft).
Install the shackle nut and bolt to the frame and tighten to 85 N.m (63 lb ft).
Remove the rear axle support.
Lower the vehicle.