Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Upper Absorber Bolts

Courtesy of GENERAL MOTORS CORP.

Install the absorber.

CAUTION: Refer to Fastener Caution .

Install the upper absorber bolts and tighten to 35 N.m (26 lb ft).

Fig 2: View Of Lower Shock Absorber Mounting Bolt & Nut

Courtesy of GENERAL MOTORS CORP.

Install the lower absorber bolt and nut and tighten the nut to 95 N.m (70 lb ft).
Remove the rear axle support.
Lower the vehicle.