LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Mirror Systems) >> Repair Instructions >> Inside Rearview Mirror Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Rearview Mirror
    GM1331303Courtesy of GENERAL MOTORS CORP.
  1. Slide the mirror downward onto the windshield support button.
    2. NOTE: Refer to Fastener Notice .
  2. Install the set screw (3).

    Tighten:  Tighten the set screw to 2 N.m (18 lb in).

  3. Connect the electrical connector (1), if removed.
  4. Pull the mirror downward and install the electrical harness cover (2).
  5. Reposition the mirror (4).
  6. Refer to Control Module References for replacement and setup information.
scientia non olet · About LEMON Manuals