LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 294 (Wiring Systems And Power Management - Introduction) >> Repair Instructions >> Ignition Lock Cylinder Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the ignition lock cylinder by performing the following procedure:
    1. Turn the ignition lock cylinder to the accessory position.
    2. Push the ignition lock cylinder in until the retaining pin locks it in place.
  2. Install the steering column trim covers. Refer to Steering Column Trim Cover Replacement .
scientia non olet · About LEMON Manuals