LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 284 (Battery, Charging System And Starting System) >> Repair Instructions >> Starter Motor Replacement (LLV/LLR) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Starter Motor
    GM1313646Courtesy of GENERAL MOTORS CORP.
  1. Position the starter motor (3) over the stud (2).
    2. CAUTION: Refer to Fastener Caution .
  2. Install the starter motor mounting nut (1) and bolt (4) and tighten to 50 N.m (37 lb ft).
    3. Fig 2: Locating Positive Battery Cable
    GM1313639Courtesy of GENERAL MOTORS CORP.
  3. Connect the battery positive cable (2) to the starter and install the starter terminal nut (1).

    Tighten the nut to 9 N.m (80 lb in).

  4. Connect the lead (4) to the starter solenoid and install the starter solenoid S terminal nut (3).

    Tighten the nut to 3.5 N.m (31 lb in).

  5. Install the intake manifold. Refer to Intake Manifold Replacement or Intake Manifold Replacement .
scientia non olet · About LEMON Manuals