LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 284 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Bracket Replacement (LH8) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Generator Bracket Replacement
    GM1897775Courtesy of GENERAL MOTORS CORP.
  1. Remove the generator. Refer to Generator Replacement (LLV/LLR)  or Generator Replacement (LH8) .
  2. Remove the power steering pump. Refer to Power Steering Pump Replacement (LLV, LLR) or Power Steering Pump Replacement (LH8) .
  3. Remove the drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement .
  4. Remove the engine wiring harness bracket bolt (4).
  5. Reposition the engine wiring harness bracket out of the way.
    6. Fig 2: View Of Generator Bracket & Bolts (4.8L, 5.3L & 6.0L)
    GM847280Courtesy of GENERAL MOTORS CORP.
  6. Remove the generator bracket bolts.
  7. Remove the generator bracket.
scientia non olet · About LEMON Manuals