LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 271 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Seat Position Sensor Replacement (Power Seat) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Seat Position Switch
    GM1334868Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the seat position sensor (1) to the seat rail with 2 nuts (2).

    Tighten:  Tighten the seat position sensor nuts to 9 N.m (79 lb in).

  2. Connect the electrical connector (13) to the seat position sensor (1).
  3. Install the seat in the vehicle. Refer to Front Seat Replacement - Bucket or Split Bench Seat Replacement .
scientia non olet · About LEMON Manuals