LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 271 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Roof Side Rail Module Replacement - Front (Crew Cab) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the head restraints from the front seats. Refer to Front Seat Head Restraint Replacement .
  3. Lower the headliner. Refer to Headlining Trim Panel Replacement (Extended Cab) or Headlining Trim Panel Replacement (Regular Cab) or Headlining Trim Panel Replacement (Crew Cab) .
    4. Fig 1: View Of Roof Rail Module Connector
    GM1276857Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the roof rail air bag electrical connector (1).
  5. Remove the forward tether bolt (3).
  6. Remove the clips (3) from the pillar.
    7. Fig 2: View Of Pillar Clips
    GM1276879Courtesy of GENERAL MOTORS CORP.
  7. Remove the 3 bolts retaining the rear curtain to the roof.
  8. Remove the bolt retaining the bracket to the roof.
    9. Fig 3: View Of Forward Curtain Clip & Air Bag Module Bolts
    GM1276868Courtesy of GENERAL MOTORS CORP.
  9. Remove the forward curtain clip (2).
  10. Remove the 3 bolts (1, 3) retaining the air bag module to the roof.
  11. Remove the roof rail air bag from the vehicle.
scientia non olet · About LEMON Manuals