LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 264 (Lighting Systems) >> Repair Instructions >> Hazard Warning Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Hazard Warning Switch Wiring
    GM1276393Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel (I/P) accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .
  2. Disconnect the hazard switch electrical connector.
    3. IMPORTANT: Ensure the tabs retaining the switch to the trim plate are released from the back side of the trim panel.
  3. Release the tabs retaining the switch to the trim plate.
    4. Fig 2: View Of Hazard Warning Switch
    GM1276394Courtesy of GENERAL MOTORS CORP.
  4. Remove the switch (1) from the trim plate.
scientia non olet · About LEMON Manuals