LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 262 (Exterior Trim System) >> Repair Instructions >> Pickup Box Endgate Latch Cover Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Endgate Cover
    GM1245393Courtesy of GENERAL MOTORS CORP.
  1. Install the endgate cover to the endgate (1).
    2. CAUTION: Refer to Fastener Caution .
  2. Install the screws retaining the endgate cover to the endgate, starting at the hole marked with the triangle (1). Tighten the endgate cover screws to 2.5 N.m (22 lb in) starting at the bolt hole marked with the triangle (1).
  3. Close the endgate.
scientia non olet · About LEMON Manuals