LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Engine Controls And Fuel - 4.4L - Introduction) >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Supercharger Assembly
    GM1614621Courtesy of GENERAL MOTORS CORP.
  1. Remove the supercharger assembly. Refer to Supercharger Replacement .
    2. Fig 2: View Of Crankshaft Position Sensor & Bolt
    GM928205Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the crankshaft position sensor electrical connector.
  3. Remove the crankshaft position sensor retaining bolt.
  4. Remove the crankshaft position sensor.
scientia non olet · About LEMON Manuals