Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Fan

Courtesy of GENERAL MOTORS CORP.

Install the fan to the vehicle.
Connect the fan to the crank adapter shaft.
Install the fan shroud. Refer to Fan Shroud Replacement (LH2) or Fan Shroud Replacement (LY7) .

NOTE: Refer to Fastener Notice .

Tighten the fan nut to the crank adapter shaft using J 41240 . See Special Tools .
Tighten: Tighten the nut to 100 N.m (74 lb ft).
Install the air cleaner intake duct. Refer to Air Cleaner Outlet Duct Replacement .