LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 213 (Engine Cooling System) >> Repair Instructions >> Fan Adapter Replacement (LH2) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cooling Fan
    GM887758Courtesy of GENERAL MOTORS CORP.
  1. Remove the cooling fan. Refer to Engine Cooling Fan Replacement .
    2. Fig 2: Cooling Fan Adapter
    GM887759Courtesy of GENERAL MOTORS CORP.
  2. Hold the cooling fan adapter from turning by placing a wrench on the adapter flat spots.
  3. Remove the cooling fan adapter bolts.
  4. Remove the cooling fan adapter from the vehicle.
scientia non olet · About LEMON Manuals