LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 185 (Rear Suspension System) >> Repair Instructions >> Stabilizer Shaft Insulator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Stabilizer Shaft Brackets Mounting Bolts
    GM858484Courtesy of GENERAL MOTORS CORP.
  1. Install the stabilizer shaft insulator to the stabilizer shaft with the slit facing forwards.
    2. NOTE: Refer to Fastener Notice .
  2. Install the stabilizer shaft bracket.
  3. Install the stabilizer shaft bracket mounting bolts.

    Tighten:  Tighten the bolts to 60 N.m (44 lb ft).

  4. Lower the vehicle.
scientia non olet · About LEMON Manuals