Removal Procedure
WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Removal the differential from the vehicle. Refer to Differential Replacement .
- Install the J 9519-E and J 21474 to the differential bushing.
- Using the J 9519-E and J 21474 , remove the differential bushing from the vehicle.
IMPORTANT:
The differential bushing is not fully seated in the bore and has voids that are in the horizontal position. Note and mark the position of the bushings prior to removal and press the new bushings in to the same position.