LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 185 (Rear Suspension System) >> Repair Instructions >> Adjustment Link Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Adjustment Link Bolts
    GM826490Courtesy of GENERAL MOTORS CORP.
  1. Install the adjustment link to the vehicle.
    2. NOTE: Refer to Fastener Notice .
    IMPORTANT: Loosely install all fasteners before tightening.
  2. Install the adjustment link to knuckle mounting bolt.

    Tighten:  Tighten the bolt to 160 N.m (118 lb ft).

  3. Install the adjustment link to frame mounting bolt.
  4. Install the adjustment link to frame mounting nut.

    Tighten:  Tighten the bolts and nut to 170 N.m (125 lb ft).

  5. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  6. Lower the vehicle.
  7. Adjust the rear toe. Refer to Rear Toe Adjustment .
scientia non olet · About LEMON Manuals