LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Wiper System & Washer System) >> Repair Instructions >> Washer Nozzle Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. Remove the hood insulator.
    3. Fig 1: View Of Washer Hose
    GM776820Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the washer hose connections (2) from the washer nozzles.
    4. Fig 2: View Of Front Washer Nozzles
    GM776818Courtesy of GENERAL MOTORS CORP.
  4. Remove the washer nozzles from the hood by pushing the tension clips (2) in towards the windshield.
  5. Push the washer nozzle (1), outward toward the windshield.
  6. Remove the inoperative washer nozzle (1) from the hood.
scientia non olet · About LEMON Manuals