LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (HVAC System - Automatic) >> Repair Instructions >> Mode Actuator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel (I/P) carrier. Refer to Instrument Panel Carrier Replacement .
    2. Fig 1: View Of Mode Actuator Electrical Connector
    GM756324Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the mode actuator electrical connector.
    3. Fig 2: Removing/Installing Mode Actuator Screws
    GM756240Courtesy of GENERAL MOTORS CORP.
  3. Remove the mode actuator screws (3).
    4. Fig 3: Removing/Installing Mode Actuator
    GM756327Courtesy of GENERAL MOTORS CORP.
  4. Remove the mode actuator.
scientia non olet · About LEMON Manuals