LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (HVAC System - Automatic) >> Repair Instructions >> Inside Air Temperature Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the I/P cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement .
    2. Fig 1: View Of Air Temperature Sensor & Aspirator Hose
    GM760802Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the aspirator hose (3) from the inside air temperature sensor (2).
  3. Disconnect the electrical connector (1) from the inside air temperature sensor (2).
  4. Disconnect the retaining clips and remove the inside air temperature sensor (2).
scientia non olet · About LEMON Manuals