LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Steering Wheel & Steering Column) >> Repair Instructions >> Turn Signal Multifunction Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Refer to SIR Caution .
  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
    3. Fig 1: View Of Multifunction Switch & Screws
    GM420196Courtesy of GENERAL MOTORS CORP.
  3. Remove the retaining screws from the multifunction switch.
  4. Disconnect the multifunction switch electrical connections.
  5. Remove the multifunction switch.
scientia non olet · About LEMON Manuals