LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Steering Wheel & Steering Column) >> Repair Instructions >> Steering Column Lock Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the knee bolster. Refer to Driver Knee Bolster Bracket Replacement .
    2. Fig 1: View Of Steering Column Module
    GM617895Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connectors to the steering column module (1).
  3. Loosen the retaining screw on the steering column control module. Slide the control module out of the retaining bracket.
scientia non olet · About LEMON Manuals