LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Interior Trim And Paneling) >> Repair Instructions >> Sail Panel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the screw cover from the sail panel.
    3. Fig 1: View Of Sail Panel
    GM1455772Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The upper sail panel is secured with a fastener. Use a magnetic-tipped screwdriver in order to remove the fastener.
  3. Remove the fastener.
  4. Pull downward on the lower front portion of the sail panel in order to release the integral clip.
  5. Release the sail panel plastic push-in retainer using the J 38778  , or equivalent.
  6. Pull outward at the top in order to release the other integral clip.
  7. Pull the sail panel from the C-pillar.
  8. Remove the lower shoulder belt fastener.
  9. Disengage the shoulder belt and escutheon from the sail panel.
  10. Route the rear outboard shoulder belt from the sail panel.
  11. Remove the shoulder belt from the sail panel.
  12. Remove the sail panel.
scientia non olet · About LEMON Manuals