LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Mirror Systems) >> Repair Instructions >> Power Mirror Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Release the tabs and push the switch bezel from the door trim.
    3. Fig 1: Identifying Electrical Connectors And Switches
    GM1235719Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connectors from the mirror switch.
  4. Remove the switch from the bezel.
scientia non olet · About LEMON Manuals