LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Sunroof System) >> Repair Instructions >> Sunroof Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the sunroof control switch into the overhead console cover. Press the switch into place until fully seated.
  2. Fig 1: Identifying Sunroof Control Switch Electrical Connector
    GM1225042Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector to the sunroof control switch.
  4. Install the overhead console cover. Refer to Roof Console Replacement .