LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Repair Instructions >> Inside Rearview Mirror Replacement >> Removal Procedure

Removal Procedure

  1. Use a flat-bladed tool in order to remove the wire cover, if equipped.
    2. Fig 1: Electrical Connector & Rearview Mirror
    GM1453822Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector (4), if equipped.
  3. Using a TORX-head® screwdriver, loosen the set screw that holds the mirror base to the windshield button.
  4. Slide the mirror (3) off of the support.
scientia non olet · About LEMON Manuals