LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Introduction >> Repair Instructions >> Ignition Lock Cylinder Replacement >> Installation Procedure

Installation Procedure

  1. Install the ignition lock cylinder by performing the following procedure:
    1. Turn the ignition lock cylinder to the accessory (ACC) position.
    2. Push the ignition lock cylinder until the ignition lock cylinder retaining pin locks in place.
  2. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
scientia non olet · About LEMON Manuals