LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting >> Repair Instructions >> Roof Identification Lamp Bulb Replacement >> Installation Procedure

Installation Procedure

  1. Install the bulb socket into the lamp assembly by rotating the bulb socket 1/4 turn clockwise.
    2. NOTE: Refer to Fastener Notice .
  2. Rotate lightbar to correct orientation and install the bolts using the T25 torx driver.

    Tighten:  4.5 N.m (30 lb in).

  3. Install the 6 fastener covers by aligning the tab to driver's side and gently pressing in place.
scientia non olet · About LEMON Manuals