Circuit/System Verification

Verify there are no debris on the lens and that the a bezel and bezel seal are not damaged.
- If debris are found on the lens, clean any debris from the lens. If the lens, bezel, or bezel seal are damaged, replace as necessary.
Ignition ON, vehicle in PARK, verify the backup lamps are OFF.
- If the backup lamps are illuminated, refer to Backup Lamps Malfunction .
Vehicle in REVERSE, verify the backup lamps are illuminated.
- If the backup lamps are not illuminated, refer to Backup Lamps Malfunction .
Vehicle in PARK, verify that the LCD is not deployed from the ISRVM.
- If the LCD is deployed, refer to Circuit/System Testing .
Vehicle in REVERSE, the LCD should deploy from the ISRVM and a clear rearview image should be displayed.
- If a clear image is not displayed, refer to Circuit/System Testing .
- If the LCD does not deploy, refer to Circuit/System Testing .