LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis (Single Page) >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC C0901 >> Typical Scan Tool Data

Typical Scan Tool Data

Battery Voltage - EBCM

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Ignition ON
Parameter Normal Value:  12.6 Volts
VSES/ABS Ignition 1 0.0 Volts* 0.0 Volts* 12.6 Volts
*The scan tool will not communicate with the EBCM if there is 0 Volts on the circuit.
scientia non olet · About LEMON Manuals