LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Steering Wheel & Steering Column) >> Repair Instructions >> Multifunction Turn Signal Switch Housing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Multifunction Switch Housing & Steering Column
    GM1364616Courtesy of GENERAL MOTORS CORP.
  1. Install the multifunction switch housing (2) to the steering column (1).
  2. Connect the electrical connectors to the multifunction switches.
  3. Install the SIR coil (3). Refer to Inflatable Restraint Steering Wheel Module Coil Replacement .
  4. Enable the SIR system. Refer to SIR Disabling and Enabling .
scientia non olet · About LEMON Manuals