LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Instrument Panel Center Support Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Instrument Panel (I/P) Center Support Bracket Bolts
    GM1206841Courtesy of GENERAL MOTORS CORP.
  1. Install the I/P center support bracket.
    2. NOTE: Refer to Fastener Notice .
  2. Install the I/P center support bracket bolts.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  3. Install the body control module. Refer to Body Control Module Replacement .
  4. Install the center console. Refer to Console Replacement .
scientia non olet · About LEMON Manuals