LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Interior Trim And Paneling) >> Repair Instructions >> Assist Handle Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Cover To Assist Handle Fasteners
    GM1283408Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Position the assist handle into place and install the fasteners.

    Tighten:  Tighten the fasteners to 2.5 N.m (22 lb in).

  2. Install the cover over the fasteners.
scientia non olet · About LEMON Manuals