LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Console Shift Lever Bezel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Console Shift Lever Bezel
    GM1244613Courtesy of GENERAL MOTORS CORP.
  1. Separate the retaining strips on the shift lever boot.
  2. Lift upward on the shift lever bezel to release the retaining tabs.
  3. Lift the bezel and boot over the shift lever.
    4. Fig 2: View Of Bezel Position Locator
    GM1244609Courtesy of GENERAL MOTORS CORP.
  4. If necessary, remove the boot assembly from the bezel by releasing the wire retainer and position locator (1).
scientia non olet · About LEMON Manuals