LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Console Shift Lever Bezel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Bezel Position Locator
    GM1244609Courtesy of GENERAL MOTORS CORP.
  1. If necessary, install the boot to the bezel ensuring the position locator (1) is pointing forward.
    2. Fig 2: View Of Console Shift Lever Bezel
    GM1244613Courtesy of GENERAL MOTORS CORP.
  2. Lower the bezel and boot over the shift lever.
  3. Ensure the retaining tabs are properly indexed to the console.
  4. Push downward on the shift lever bezel to seat the retaining tabs.
  5. Attach the retaining strips on the shift lever boot.
scientia non olet · About LEMON Manuals