LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 511 (Vehicle Diagnostic Information - Scan Tool Information) >> Specifications >> Radio Scan Tool Information (without Navigation Radio)

Radio Scan Tool Information (without Navigation Radio)

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
Radio Scan Tool Data Parameters

Parameter Expected Value Definition
Operating Conditions:  Ignition ON
Amplifier (U85 Only) Varies The scan tool displays Present or Not Present indicating the status of the audio amplifier.
Antenna Signal Varies The scan tool displays 0-300. The signal from the antenna is measured in dBuV.
Band Number Varies The scan tool displays AM/FM1/FM2/XM1/XM2. This is the current band setting.
Cassette Cut Tape Varies The scan tool displays 0-999. This is the number of cut tape errors the radio has recorded
Cass. Load/Unload Errors Varies The scan tool displays 0-999. This is the number of cassette loading and unloading errors the radio has recorded.
Cassette Inserted Varies The scan tool displays Yes/No indicating if a cassette tape is detected.
Cassette Metal Varies The scan tool displays Metal/Not Metal indicating if a metal type cassette tape is detected.
Cassette Side Varies The scan tool displays Top/Bottom indicating the current side being played of an inserted cassette tape.
Cassette Tight Tape Varies The scan tool displays 0 999. This is the number of cassette tight tape errors the radio has recorded.
CD Changer Varies The scan tool displays Not Connected/Connected indicating the status of a CD changer.
CD Focus Errors Varies The scan tool displays 0-999. This is the number of CD focus errors the radio has recorded
CD Inserted Varies The scan tool displays Yes/No indicating if a CD is inserted in the CD player.
CD Load/Unload Errors Varies The scan tool displays 0-999. This is the number of CD loading and unloading errors the radio has recorded.
CD Tracking Errors Varies The scan tool displays 0-999. This is the number of CD tracking errors the radio has recorded.
Driver Number Varies The scan tool displays Unknown/Driver 1/Driver 2. This is the memory position the driver has selected.
New VIN Counter Varies This numeric value increments each time the VIN is commanded to re-learn.
Phone Present The scan tool displays Present or Not Present. This indicates if the radio detects the vehicle is equipped with OnStar.
Preset Control Varies The scan tool displays Not A Preset/Preset 1/ Preset 2/ Preset 3/ Preset 4/ Preset 5/ Preset 6. This is the status of the preset when the radio is on a station.
Single CD Track Number Varies The scan tool displays 0-255. This indicates the CD track number currently being played.
Source Varies The scan tool displays Off/Tuner/ Radio Monitor/ Cassette/ CD/ RDS Interrupt/ ICDX/ CD Changer/ Phone Stereo/ MD Changer/ Single MD/ Nav Voice Stereo/ Enhanced Stereo/ AD Stereo/ Phone Mono/ Nav Voice Mono/ Enhanced mono/ AD Mono/ RSE Stereo/ DRR Tuner. This is the current source/type of the signal being received/played.
Theft Armed Learned VIN The scan tool displays No VIN/ Learned VIN.
Theft Lock Unlocked The scan tool displays Unlocked/Locked. The scan tool displays locked when the radio receives the incorrect VIN number.
Total Cassette Hours Varies The scan tool displays 0-999 hrs. This is the total number of hours the cassette player has been used.
Total CD Hours Varies The scan tool displays 0-999 hrs. This is the total number of hours the CD player has been used.
Radio Scan Tool Output Controls

Scan Tool Output Control Description
Left Front Speaker Commanding the speaker ON will turn OFF all speakers except this speaker, including door tweeter if equipped.
Commanding the speaker OFF will turn OFF all speakers.
Left Rear Speaker Commanding the speaker ON will turn OFF all speakers except this speaker, including door tweeter if equipped.
Commanding the speaker OFF will turn OFF all speakers.
Right Front Speaker Commanding the speaker ON will turn OFF all speakers except this speaker.
Commanding the speaker OFF will turn OFF all speakers.
Right Rear Speaker Commanding the speaker ON will turn OFF all speakers except this speaker.
Commanding the speaker OFF will turn OFF all speakers.