LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 475 (Rear Suspension System) >> Repair Instructions >> Lower Control Arm Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  3. Remove the stabilizer shaft link lower retaining nut.
  4. Disconnect the stabilizer shaft link from the lower control arm.
  5. Remove the rear coil spring. Refer to Coil Spring Replacement .
    6. Fig 1: Lower Control Arm-To-Knuckle Mounting Bolt
    GM783094Courtesy of GENERAL MOTORS CORP.
  6. Remove the lower control arm to knuckle bolt.
    7. Fig 2: Lower Control Arm-To-Frame Bolt & Nut
    GM803138Courtesy of GENERAL MOTORS CORP.
  7. Remove the lower control arm to frame bolt and nut (1).
  8. Remove the lower control arm.
scientia non olet · About LEMON Manuals