LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 473 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Insulator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stabilizer shaft insulator to the stabilizer shaft with the slit facing rearward.
  2. Install the stabilizer shaft bracket.
    3. CAUTION: Refer to Fastener Caution .
  3. Install the stabilizer shaft bracket mounting bolts and tighten to 110 N.m (81 lb ft).
    4. Fig 1: Stabilizer Shaft Link-To-Stabilizer Shaft Retaining Nuts
    GM874638Courtesy of GENERAL MOTORS CORP.
  4. Install the stabilizer shaft link to the stabilizer shaft.
  5. Install stabilizer shaft link to stabilizer shaft retaining nut and tighten to 110 N.m (81 lb ft).
  6. Install the tires and wheels. Refer to Tire and Wheel Removal and Installation .
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals