Adjustment Procedure
WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
- Install the J 45845 or the J-45845-10 to the lower control arm and the frame.
- Loosen the lower control arm to frame bolt.
- Adjust the camber angle by turning the turnbuckle on J 45845
or the J-45845-10
until the specifications have been met.
Tighten: Tighten the bolt to 135 N.m (96 lb ft).
- Verify that the camber is still with specifications. Refer to Wheel Alignment Specifications .
- Adjust the rear toe. Refer to Rear Toe Adjustment .
CAUTION:
Refer to Fastener Caution
.