Pressure Increase
WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
After the wheel slip is corrected, a pressure increase occurs. The isolation and dump valves are returned to their off states and brake pressure in the hydraulic circuit is once again dependant on the amount of force applied to the brake pedal by the driver. If the driver applies too much pressure causing wheel slip, the ABS activation sequence reoccurs.