LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 365 (Lighting System) >> Repair Instructions >> Brake Pedal Position Sensor Calibration >> Calibration Procedure

Calibration Procedure

WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the parking brake.
  2. Place the transmission in the PARK position.
  3. Install a scan tool.
  4. Clear all IPM DTCs before proceeding.
  5. Turn ON the ignition, with the engine OFF.
  6. Navigate to the Vehicle Control Systems menu.
  7. Select Module Setup menu item.
  8. Select Instrument Panel Module menu item.
  9. Select the BPP Sensor Calibration procedure and follow the directions displayed on the screen.
scientia non olet · About LEMON Manuals