LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 361 (Cellular System, Entertainment System, And Navigation System) >> Repair Instructions >> Cellular Communications/Digital Radio Antenna Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Digital Radio Antenna Connectors, Bolt, Expansion Sleeve, and Retainer
    GM863301Courtesy of GENERAL MOTORS CORP.
    CAUTION: DO NOT apply paint or clear coat to the antenna. This will damage the function of the antenna, causing poor reception or loss of signal reception.
  1. Remove the rear sail panels. Refer to Sail Panel Replacement .
    2. CAUTION: Use care when removing or installing the headliner. Excessive bending will damage the headliner.
  2. Lower the rear of the headliner.
  3. Remove the foam tape from the antenna cable connection.
  4. Disconnect the antenna connectors (1).
  5. Remove the antenna bolt (2) and expansion sleeve (3).
    6. Fig 2: View Of Antenna Assembly
    GM1491976Courtesy of GENERAL MOTORS CORP.
  6. Remove the antenna.
  7. Remove the screws securing antenna mast to the antenna base.
  8. Remove the mast.
scientia non olet · About LEMON Manuals