LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 328 (Shift Interlock System) >> Repair Instructions >> Automatic Transmission Shift Lock Control Actuator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 GMC Canyon and 2009 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Automatic Transmission Shift Lock Control Actuator
    GM324906Courtesy of GENERAL MOTORS CORP.
    WARNING: Refer to SIR Warning .
  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the steering column trim covers. Refer to Steering Column Trim Cover Replacement .
  3. Disconnect the automatic transmission shift lock control actuator electrical connector.
  4. Put the shift lever clevis into the neutral position.
  5. Use a small screwdriver to pry the automatic transmission shift lock control actuator away from the steering column jacket and the cable shift cam assembly.
  6. Remove the automatic transmission shift lock control actuator.
scientia non olet · About LEMON Manuals